Compare products

Save energy, time and space

Energy
Most repair jobs involve only one or a few panels. PowerCure activates only the IR lamps required for the selected curing area, rather than heating the entire spray booth. Individual lamp control and automatic positioning ensure that energy is concentrated where it is needed.

Time
Select the panels and paint material on the touchscreen and start the curing process. PowerCure automatically moves to the correct position and controls the curing process. A typical repair can be cured in 10 minutes or less, followed by approximately 10 minutes of cooling before the vehicle can be polished or processed further.

Space
PowerCure increases the drying capacity of an existing spray booth, reducing the need for additional booths purely to increase curing capacity. This leaves valuable workshop space available for other operations.

Automated curing for selected panels

PowerCure travels along rails installed in the spray booth and passes over the selected areas of the vehicle at a pre-programmed speed. The IR heaters are individually controlled to provide uniform heat distribution across the curing area.

Turning side wings automatically adjust when the front or rear of the vehicle is selected, while laser distance sensing helps optimize heating of the bonnet, roof and boot.

PowerCure is primarily designed for curing 1–3 vehicle panels, but can also be used for loose parts and complete vehicles.

Designed around the repair process

PowerCure adapts the curing process to the selected paint material and the size and shape of the vehicle. Sensors and microprocessors control parameters including power output, movement speed, distance and curing time.

Because infrared energy heats the object rather than the surrounding booth air, the operator can re-enter the booth immediately after curing. Once the heated surface has cooled to room temperature, the vehicle can be polished or moved on to the next process.

Key benefits

• Fast infrared curing directly inside the spray booth
• Primarily optimized for 1–3 panel repairs
• Cures loose parts and complete vehicles
• Individual IR lamp control
• Automatic positioning of the curing arch
• Uniform heat distribution
• Programs for different paint materials
• Touchscreen operation
• Integrated distance sensing
• No pre-heating of IR emitters
• Power transmission integrated into the rails
• No loose or trailing power cables
• Efficient lamp cooling
• IR lamp lifetime up to approximately 20,000 operating hours
• Available as IRT PowerCure Single or IRT PowerCure Double

Typical curing times for a medium-sized vehicle: